86-17708476248

EN
Բոլոր բաժինները

հաստոցներ

Դու այստեղ ես : Տուն>արդյունք>Մշակում կենտրոն>հաստոցներ

  • https://www.alloy-ronsco.com/upload/product/1634609827252794.jpg
  • https://www.alloy-ronsco.com/upload/product/1634609830756174.jpg
  • floor-plate1
  • 2

Չինաստան Արտադրող Հատուկ պողպատի բարձրորակ հարմարեցված կտրման մշակում

Cutting Processing is a process of using a tool to cut a part of the excess material from the blank (or profile), and process the blank into a part processing process that meets the requirements of the drawing in terms of size, shape accuracy and surface quality.

  • ապրանքի նկարագրությունը
  • Հարցում

Model: Cutting Processing
Ապրանքանիշը: Ronsco


Cutting Processing refers to the use of cutting tools (including cutting tools, abrasive tools and abrasives) with higher hardness than the workpiece to cut off the excess material layer on the blank or workpiece into chips, so that the workpiece can obtain the specified geometric shape, size and surface quality. The processing process that meets the expected technical requirements.

Cutting refers to the processing method that uses cutting tools (including cutting tools, abrasive tools and abrasives) to cut off the excess material layer on the blank or workpiece into chips, so that the workpiece obtains the specified geometric shape, size and surface quality.

Any cutting processing must have three basic conditions: cutting tool, workpiece and cutting motion, which are called the three elements of cutting. The cutting tool should have an edge, and its material must be harder than the workpiece. Different tool structures and cutting motion forms constitute different cutting methods. Cutting methods with a tool with a fixed blade shape and number of edges include turning, drilling, boring, milling, planing, broaching and sawing, etc.; use abrasive tools or abrasives with a fixed blade shape and number of edges Cutting methods include grinding, grinding, honing and polishing.

Cutting is to use the relative movement of the cutting tool and the workpiece to remove the excess metal layer from the blank (casting, forging, profile, etc.) to obtain the processing method of machine parts whose dimensional accuracy, shape and position accuracy, and surface quality fully meet the requirements of the pattern . Most of the parts processed by casting, forging, and welding are blanks of parts, which can rarely be used directly on the machine, and further cutting is required to meet the technical requirements of the parts. Cutting processing is divided into two parts: mechanical processing (referred to as machining) and fitter. Machining refers to the cutting and processing of parts by workers operating machine tools.

Cutting is the most important processing method in mechanical manufacturing. Although the precision of blank manufacturing continues to improve, and the application of precision casting, precision forging, extrusion, powder metallurgy and other processing technologies is increasing, due to the wide application range of cutting processing, and can achieve high precision and low surface roughness, It still occupies an important position in the mechanical manufacturing process.


ապրանքային անուն Cutting Processing & Machining of nickel-based superalloys
նյութական Չժանգոտվող պողպատ 304 / 310S / 316L / 317L / 904L / 2205 / 2507 / 32760 / 253MA / 254SMo և այլն
Monel 400 / Monel K-500 
Inconel 600 / Inconel 601 / Inconel 625 / Inconel 617 / Inconel 690 / Inconel 718 / Inconel X-750
Incoloy A-286 / Incoloy 800 / Incoloy 800H / Incoloy 800HT
Incoloy 825 / Incoloy 901 / Incoloy 925 / Incoloy 926
Nimonic 75 / Nimonic 80A / Nimonic 90 / Nimonic 105 / Nimonic 263 / Nimonic L-605
Hastelloy B / Hastelloy B-2 / Hastelloy B-3 / Hastelloy C / Hastelloy C-276 / Hastelloy C-22
Hastelloy C-4 / Hastelloy C-200 / Hastelloy G-35 / Hastelloy X / Hastelloy N
Օստենիտային չժանգոտվող պողպատ 904L / XM-19 / 316Ti / 316LN / 317L / 310S / 253MA
DP պողպատ 254SMo / F50 / 2205/2507 / F55 / F60 / F61 / F65 
A105,S355,F11, F22, 16Mn, 42CrMo4, 34CrNiMo6, 18CrNiMo7-6, 31CrMoV9, 40CrNiMo,4130,4140, A350 LF2
PH չժանգոտվող պողպատ 15-5PH / 17-4PH / 17-7PH 
Deformation processing  Bending, Cutting, Rolling, Stamping
Տեխնիկական  Հարմարեցված
Դիպուկություն Հարմարեցված
ՄՈԿ Customized, small order acceptable
Առաքում անգամ  7-35 օր կամ բանակցություն
QC  TUV, SGS, BV, ABS, LR և այլն
Նկարչության ձևաչափ  STEP, STP, GIS, CAD, PDF, DWG, DXF և այլն կամ նմուշներ: 
դիմում  Chemical, Pharmaceutical & Bio-Medical, Petrochemical & Refinery, Environmental, Food Processing, Aviation, Chemical Fertilizer, Sewage Disposal, Desalination, Waste Incineration etc 
Այլ ծառայություններ  Ունեցեք հումքի մատակարարում, Անվճար նմուշներ, Անվճար գծագրության ձևավորում, Անվճար գործընթացի ձևավորում 


Հետադարձ Կապ